Home / Projects / Roofing & shingles
Roofing

Roofing & Shingle Bin Rental in Ajax & the GTA

A roof tear-off is the one job where the usual logic about bin size stops working. Shingles are dense, and a bin that looks half empty can already be carrying as much as it should. Getting this right is less about volume than about weight.

A 14-yard roll-off bin on a driveway, loaded with old cabinets, drywall and torn-off shinglesRoofing & shingles
Choosing a size

Why bigger is not automatically better

For most single-storey homes around here the 14-yard bin is the size we send out, and it is the size most roofers ask for. The instinct on a larger roof is to move up to the 20-yard, and sometimes that is right — but not always, because with shingles you tend to reach the weight the bin can safely carry before you run out of room in it. A bigger box does not raise that ceiling. If your roof is steep, large, or carrying two layers of old shingles, the useful thing is to tell us that on the phone rather than pick a size from a chart. We would rather plan a swap than send a bin that cannot legally leave your driveway full.

Get a quote → (416) 871-2453
What goes in

What comes off a roof

  • Asphalt shingles, in one layer or several
  • Roofing felt, underlay and ice-and-water membrane
  • Rotten or delaminated sheathing
  • Drip edge, flashing and vents
  • Old ridge cap and starter strip
  • Nails, and a great many of them
What stays out

What we can’t take

The usual three still apply — dirt, concrete and brick cannot go in. On roofing jobs the one that occasionally catches people is a chimney being taken down at the same time: the brick from it has to go somewhere other than this bin.

Why dirt, concrete and brick are out →

Planning

Loading a tear-off sensibly

Spread the load across the floor

A single heap in the middle is harder on the bin and harder to tarp. Shingles should go in level, from one end to the other.

Tarp the ground before you start

Nails are the reason. A tarp around the bin and along the drip line saves an hour of magnet work and a flat tyre later.

Strip in sections you can clear the same day

Opening more roof than you can load and dry in is how a tear-off turns into an interior repair.

Keep the rest of the job out of it

If you are also gutting a bathroom that week, that waste is better in its own bin — mixing bulky renovation debris into a shingle load wastes the capacity you are paying for.

Questions

Roofing & shingles bin rental — FAQs

What size bin do I need for a roof tear-off?

A 14-yard suits most single-storey homes in this area. Rather than scaling up by roof size alone, call and describe it — the number of layers coming off matters as much as the footprint, and weight is what actually decides this.

Can I fit two layers of shingles in one bin?

Sometimes, and it depends entirely on the roof. Two layers roughly doubles what is coming down, so it is worth a conversation before the booking rather than a guess. We will tell you honestly whether to plan for a swap.

Can I put the old plywood sheathing in too?

Yes, sheathing is fine and it is light compared with the shingles. Mention it when you book so we have a realistic picture of the whole load rather than just the roof covering.

What about the nails and the small debris?

All fine in the bin. The thing worth doing is laying tarps first so the small stuff ends up somewhere you can gather it, rather than in the lawn and the driveway for the next two years.

Delivering from our Ajax yard across the GTA — see the areas we cover.

Roofing & shingles

Tell us the job — we’ll confirm the size

Describe what’s coming out and we’ll price it flat.

Call Now Get a Quote